Description

SikaCeram-88

Cementitious tile adhesive

Is a one-pack pre-mixed cementitious tile adhesive contains, cement, polymers, quartz minerals and additives. For bonding ceramic tiles and mosaics to floors and walls.

It is a tile adhesive with normal adhesion classification (C1) at air-cured temperature.

Features:

• Easy to use with excellent workability and thixotropic consistency
• Very good adhesion to most common substrates (concrete, cementitious mortar, stone, bricks, etc.)
• Can use with SikaLatex®-88 or SikaLatex®-118 to increase performance of the adhesive
• Colour: grey powder
• Packaging: 25 kg bag

Usage:

• It’s used for bonding ceramic tiles in continuous thin layers, (up to 10 mm thick).
• Due to its excellent adhesion strength, it is used to replace the traditional method of bonding tiles (using cement and sand)
• SikaCeram-88 is suitable to bond the following types of tiles:
  • Ceramic, homogeneous and mosaic tiles
  • Porcelain tiles, when SikaCeram-88 is mixed with either SikaLatex-88 or SikaLatex-118
• Can use on walls and floors internally, on these substrates:
  • Concrete and mortar
  • Bricks

Mixing Ratio

• 5.5–6.0 L of water per 25 kg bag

Open Time

• Open time is approximately 20 minutes under normal temperature and humidity conditions.
• In unfavorable conditions, the open time may be shorter.

Applied Product Ready for Use

At +25 °C